Xerox 4850 Installation Planning Manual page 164

DocuPrint NPS/IPS on a Novell network
D-12
d. Remote Printer for Novell Netware -- <Y>
e. Use Print Server for Novell Netware -- <N>
f. Name of Novell Print Server -- PGazette
g. IPX Internal Network Number [000000##] (assigned by
network administrator)
h. IPX number of Connected LAN [000000##] (assigned by
network administrator)
i. Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
j. Save all of the options.
4. Enter Create Virtual Printer Gazette (must be the same
name as the PSERVER printer name).
5. Enter Start All.
6. Reboot the NPS/IPS.
7. Perform the following tasks from the Novell server console.
a. Enter Load PSERVER PGazette.
b. Make sure the PSERVER window displays and Gazette
activates and is waiting for jobs.
8. Provide all of the required installation parameters identified in
the checklist provided in Chapter 2 of this guide to your
service representative.
In the following illustration, the queue, remote printer, and virtual
printer are configured with the same name, and the specified
printer is set to print duplex. The user sends a print job through
the LPT1 port to a queue named DPDuplex that is sent to the
DPDuplex, and assigned to DPDuplex virtual printer.
Client Netware
Workstation File Server
Queue
Device
LPT1 Gazette
Figure D-2. DocuPrint NPS/IPS configured as an RPRINTER
Netware File Server
RPRINTER configuration
Remote
Printer
Gazette
Installation Planning Guide
DocuPrint
Virtual
Printer
Gazette