Replacing The Transfer Belt Unit - Olivetti PF-P09 Service Manual

4. PERIODICAL MAINTENANCE PROCEDURE
4.2.3

Replacing the transfer belt unit

A. Periodically replaced parts/cycle
• Transfer belt unit: Every 100,000 counts (2 pages/job)
B. Removal procedure
1. Turn OFF the power switch.
2. Remove the waste toner bottle.
See P.14
3. Remove the toner cartridge (C,M,Y,K).
See P.8
4. Remove the imaging unit (C,M,Y,K).
See P.11
16
5. Open the right door [1].
[1]
A2YFF2C014DA
6. Remove the exit cover.
A2YFF2C015DA
7. Completely insert the protective
sheet [1] supplied with the transfer
belt in the direction of the arrow.
[1]
A2YFF2C016DA
Field Service Ver. 1.1 May 2011