Dc Power Supply Fan Motor (Fm10) - Olivetti PF-P09 Service Manual

7. OTHER MAINTENANCE ITEM
7.3.22

DC power supply fan motor (FM10)

1. Remove the waste toner bottle.
See P.14
2. Remove the rear cover.
See P.43
3. Remove the left cover.
See P.43
4. Remove the ADF.
See P.98
5. Remove the scanner unit.
See P.96
6. Remove the front right cover.
See P.45
7. Remove the upper cover.
See P.49
[4] [1]
[2]
11. To reinstall, reverse the order of removal.
70
[3] [5]
[2] [3]
A2YFF2C087DA
[1]
A2YFF2C088DA
Field Service Ver. 1.1 May 2011
8. Disconnect the connector [1], and
remove it from the wire saddle [2].
9. Remove three screws [3], release
the tab [4], and slide the duct [5].
10. Unlock the tab [1], and remove the
DC power supply fan motor [2].