Protocol List - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
13.9.3 T.30 PROTOCOL LIST
A. Use
• Print out T.30 or V8 protocol after communication.
SESSION: Session number
FUNCTION: Function name
DESTINATION STATION: Destination Name/Tel. No.
DATE/TIME: Communication Date & Time
PAGE: Total page number for this session
DURATION: Communication using time
MODE: Communication speed and ECM mode
RESULT: Communication result
RING: Recording ring ON/OFF time by "ms"
Only for RX function and record last 16 time
TX: T.30 command sent by local fax
RX: T.30 command received from remote fax
DATA: T.30 frame that include address & control & data
B. Procedure
1. Enter the [SERVICE MODE].
2. Select [REPORT] and press the Select key.
3. Select [T.30 PROTOCOL LIST] and press the Select key.
13. SERVICE MODE
165