Olivetti PF-P09 Service Manual page 61

4. PERIODICAL MAINTENANCE PROCEDURE
[1]
[1]
[2]
[2]
14. To reinstall, reverse the order of removal.
15. From the Menu, select [SERVICE MODE]
[TRANSFER BELT] and execute this function to reset the transfer belt counter value.
See P.149
16. From the Menu, select [PS/PCL PRINT]
[TONE CALIBRATION] and execute this function.
18
A0VDF2C536DA
A2YFF2C021DA
[1]
A2YFF2C022DA
[QUALITY MENU]
Field Service Ver. 1.1 May 2011
11. Remove the protective cover [1] from
the new transfer belt.
NOTE
• Be careful not to touch the surface
of the belt.
12. Insert the transfer belt [2] along the
rails [1].
13. Hold the both handles [1] and raise
the guide [2].
[ADJUST] [SUPPLIES REPLACE]
[CARIBRATION]