13. SERVICE MODE
13.15.27 REPORT SETTING
A. Use
• Select the items of report data that will be sent to the center.
• The items of report data which can be set are as follows.
SALES COUNT/ERROR COUNT/SERVICE COUNT/LIFE COUNT/SYSTEM DATA/
HISTORY DATA/ADJUSTMENT DATA/COVERAGE DATA
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [CSRC SET-
TING] [REPORT SETTING].
13.15.28 RAM CLEAR
A. Use
• To reset the every setting data for CS Remote Care to the default settings.
• To be used for setting CS Remote Care.
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [CSRC SET-
TING] [RAM CLEAR].
NOTE
• If RAM clear is selected during transmission, RAM clear processing will be imple-
mented at the time the transmission is completed regardless of whether it is done
properly or not.
184
Field Service Ver. 1.1 May 2011