Misfeed At Adf Section - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
16.3.10

Misfeed at ADF section

A. Detection timing
Type
Detection of • The registration sensor (on REYB/1) is not unblocked even after the lapse of a
misfeed at ADF
section
• The registration sensor (on REYB/1) is not blocked even after the lapse of a
• The registration sensor (on REYB/1) is unblocked when the power switch is
Detection of paper
left in ADF section
B. Action
Registration sensor (REYB/1)
Step
1 Initial check items
2 Check the connectors on the REYB/1 for
proper connection and correct as neces-
sary.
3 Check the connectors on the MFPB/1 for
proper connection and correct as neces-
sary.
4 Change REYB/1.
5 Change MFPB/1.
6 Change ADF.
predetermined period of time after the DF transport motor (M100) has been
energized.
predetermined period of time after the registration sensor (on REYB/1) has
been unblocked.
turned ON, the cover is opened and closed, or a misfeed or malfunction is
reset.
Relevant electrical parts
Action
Description
MFP board/1 (MFPB/1)
WIRING DIAGRAM
Control signal
-
-
-
-
-
-
16. JAM DISPLAY
Location (electri-
cal component)
-
-
-
-
-
-
279