Olivetti PF-P09 Service Manual page 216

Field Service Ver. 1.1 May 2011
Engine Element Data Information
Element Data Name
INSIDE HUMIDITY
INSIDE TEMPERATURE
PH TEMPRATURE
SENSOR INFORMATION1
SENSOR INFORMATION2
SENSOR INFORMATION3
SENSOR INFORMATION4
SENSOR INFORMATION5
FUSER HEATER1 TEMPERATURE
FUSER HEATER2 TEMPERATURE
IDC SENSOR1 PS
IDC SENSOR1 P
TONER LEVEL SENSOR C
TONER LEVEL SENSOR M
TONER LEVEL SENSOR Y
TONER LEVEL SENSOR K
VDC VOLT C
VDC VOLT M
VDC VOLT Y
VDC VOLT K
VPP VOLT C
VPP VOLT M
VPP VOLT Y
VPP VOLT K
VPP VOLT LIMIT C
VPP VOLT LIMIT M
VPP VOLT LIMIT Y
VPP VOLT LIMIT K
DUTY C
DUTY M
DUTY Y
DUTY K
IDC BASE REFLECTION1
TRANS CURRENT2
• Displays the inside humidity (in 1% increments).
• Displays the inside temperature (in 1 ºC increments).
• Displays the PH temperature (in 1 ºC increments).
• Displays the input port status of the sensors and switches in
hexadecimal numbers.
• To be used for troubleshooting when troubles/jams occur.
For allocating Bits for SENSOR INFORMATION 1 to 3, see the
attached chart, "Sensor Information List."
• Displays the latest temperature on the middle of the heating
roller (in 1ºC increments).
• Displays the latest temperature at the edges of the heating
roller (in 1 ºC increments).
• Shows the latest IDC data.
• Range of output: 0V to 9.99V (in 0.01V increments)
• Displays the number of times the toner level sensor has
detected an empty condition during one cycle of developer agi-
tation.
• Range of output: 0 to 200 (in increments of one time)
• Displays the Vdc voltage of each color of toner.
• Range of output: -1000V to 255V (in 1V increments)
• Displays the Vpp voltage of each color of toner.
• Range of output: 700V to 2000V (in 1V increments)
• Displays the limit value of Vpp voltage of each color of toner.
• Range of output: 700V to 2000V (in 1V increments)
• Displays the duty ratio of each color of toner.
• Range of output: 0% to 100.0% (in 0.1% increments)
• Displays the IDC intensity adjustment value.
• Range of output: 0 to 1023 (in 1 increments)
• Displays the latest second image transfer output value.
• Range of output: -800V to 5000V (in 1V increments)
13. SERVICE MODE
Description
173