Ph Unit - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
7.3.15

PH Unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
1. Remove the waste toner bottle.
See P.14
2. Remove the toner cartridge (C, M, Y, K).
See P.8
3. Remove the imaging unit (C, M, Y, K).
See P.11
4. Remove the exit cover.
See P.44
5. Remove the transfer belt unit.
See P.16
6. Remove the fuser unit.
See P.19
7. Remove the left cover.
See P.43
8. Remove the rear right cover.
See P.44
9. Remove the FAX board.
See P.50
10. Remove the high voltage unit.
See P.57
[1]
CAUTION
[2]
[1]
A2YFF2C081DA
7. OTHER MAINTENANCE ITEM
11. Remove four screws [1], and remove
four rails [2].
61