Field Service Ver. 1.1 May 2011
7.3.26
Toner supply clutch/Y (CL4) / Toner supply clutch/M (CL5) /
Toner supply clutch/C (CL6) / Toner supply clutch/K (CL7)
1. Remove the toner cartridge (C,M,Y,K).
See P.8
2. Remove the waste toner bottle.
See P.14
3. Remove the imaging unit (C,M,Y,K).
See P.11
4. Remove the fuser unit.
See P.19
5. Remove the rear cover.
See P.43
6. Remove the left cover.
See P.43
7. Remove the ADF.
See P.98
8. Remove the scanner unit.
See P.96
9. Remove the front right cover.
See P.45
10. Remove the upper cover.
See P.49
[3]
[2]
11. Disconnect the connector [1].
[1]
12. Remove the screw [2], and remove
13. Disconnect two connector [4].
[4]
A2YFF2C068DA
7. OTHER MAINTENANCE ITEM
the exit drive assy [3].
75