Replacing The Transfer Roller - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
4.2.2

Replacing the transfer roller

A. Periodically replaced parts/cycle
• Transfer roller: Every 100,000 counts (2 pages/job)
B. Removal procedure
1. Open the right door.
[1]
5. To reinstall, reverse the order of removal.
6. From the Menu, select [SERVICE MODE]
[TRANSFER ROLLER] and execute this function to reset the transfer roller counter
value.
See P.149
7. From the Menu, select [PS/PCL PRINT]
[TONE CALIBRATION] and execute this function.
4. PERIODICAL MAINTENANCE PROCEDURE
2. Push two levers [1] inside to unlock
3. Rotate the transfer roller [2] in the
[2]
A2YFF2C012DA
4. Remove the transfer roller [1].
[1]
A2YFF2C013DA
[ADJUST]
[QUALITY MENU]
the transfer roller.
direction of the arrow.
[SUPPLIES REPLACE]
[CARIBRATION]
15