Loop Detection Clutch (Cl8) - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
21. To reinstall, reverse the order of removal.
7.3.27

Loop detection clutch (CL8)

1. Remove the fuser unit.
See P.19
2. Remove the waste toner bottle.
See P.14
3. Remove the rear cover.
See P.43
4. Remove the left cover.
See P.43
5. Remove the rear right cover.
See P.44
6. Remove the FAX board.
See P.50
7. Remove the high voltage unit.
See P.57
8. Remove the ADF.
See P.98
9. Remove the scanner unit.
See P.96
10. Remove the front right cover.
See P.45
11. Remove the upper cover.
See P.49
[3]
[2]
12. Disconnect the connector [1].
[1]
13. Remove the screw [2], and remove
14. Disconnect two connectors [4].
[4]
A2YFF2C068DA
7. OTHER MAINTENANCE ITEM
the exit drive assy [3].
77