Transmission Error Code (0080-00Ff) - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
20.4.2

Transmission error code (0080-00FF)

(1) Error code: 0080
Definition Can not detect any G3 signal within 35 sec. specified by ITU-T in phase B.
Solution 1.
2.
(2) Error code: 0081
Definition Received DTC signal in transmission phase.
Solution 1.
(3) Error code: 0082
Definition Transmitting unit receives a signal other than DIS or DTC and DCN in phase B.
Solution 1.
(4) Error code: 0083
Definition Detected FSK signal, but can not receive any signal within 35 seconds.
Solution 1.
2.
3.
(5) Error code: 0084
Definition Detect DCN signal in phase B.
Solution 1.
2.
(6) Error code: 0085
Definition Transmitting unit sending DCS 3 times consecutively, but each time responds with
DIS/DTC.
Solution 1.
2.
(7) Error code: 0086
Definition Detected responds signal other than DTC, DIS, FTT, DCN or CFR after sending
DCS.
Solution 1.
Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
Boost the TX level of sender's machine.
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Resend the FAX again.
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
Boost the machine TX level. <*1>
Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
20. FAX ERROR
325