Table of Contents
Advertisement
home and industrial automation
06) Generate a single pulse after a preset time
The trailing edge at the output A (button release) starts counting down time t
on for a time t
During the t
2.
at any time interrupts the sequence and the relay returns to waiting for a pressing of button A.
PCS533 programmable time relay – User manual v. 1.0.1
Command: Return to
Select step: 1
Number of repetitions: 0
– t
cycle the subsequent pressings of a button A will be ignored. Pressing button B
1
2
Command: Input B – special function
Type: Rising edge
Action: Reset
Time: 0 s
Command: Input A
Type: Wait for a trailing edge
Time: 0 s
Execution
of
the
transferred to step 1 - waiting for
the pressing of a button A. The
number of repetitions is set to 0
which means that this cycle can be
repeated indefinitely.
Warning: Despite the fact that the
Return
to
skipped the step 0 that
establishes
function for the input B,
this
command,
entered, remain active all
the time.
After that time the relay switches
1.
The Reset function is assigned to
the input B. Pressing at any time the
button connected to input B will
reset
the
controller
program will start again from the
beginning.
The relay waits for the pressing of a
button A. The time is set to 0
seconds, so the relay will react
directly to pressing. Up to this point
the execution of the program is
stopped.
program
is
command
the
special
once
and
the
36
Advertisement
Table of Contents
Need help?
Do you have a question about the PCS-533 and is the answer not in the manual?
Questions and answers