Generate A Single Pulse With Rising Edge - F&F PCS-533 User Manual

home and industrial automation

03) Generate a single pulse with rising edge

Pressing the A button (rising edge) will switch on the relay for a preset time t. During that time the relay does not
react to the subsequent pressings of the button A. After the preset time elapses the relay switches off and the
cycle starts from the beginning - the relay waits for the next pressing of the button A. Pressing the button B at any
time interrupts the sequence and the relay returns to waiting for a pressing of the button A.
PCS533 programmable time relay – User manual v. 1.0.1
Command: Input B – special function
Type: Rising edge
Action: Reset
Time: 0 s
Command: Input A
Type: Wait for a rising edge
Time: 0 s
Command: Output
Type: Turn on
Time: 0 s
Command: Pause
Time: 10 s
the program from the beginning.
Another way of resetting the
controller is to turn off the power
supply.
The Reset function is assigned to
the input B. Pressing at any time the
button connected to input B will
reset the controller
program will start again from the
beginning.
The relay waits for the pressing of a
button A. The time is set to 0
seconds, so the relay will react
directly to pressing. Up to this point
the execution of the program is
stopped.
Set the relay in the on position.
Time 0 - the relay will remain on
until the next Output command will
change it.
Pause suspends the execution of
the rest of the program for a preset
time (default - 10 s). After this time
the next step of the program is
executed.
Warning: The time that is set here
determines the delay of
the switching on of the
relay. If necessary, set the
time to the desired value.
and the
32