F&F PCS-533 User Manual page 20

home and industrial automation
PCS533 programmable time relay – User manual v. 1.0.1
Command: Output
Mode: Off
Time: 0 s
Command: Pause
Time: 1 s
Command: Return to
Select step: 0
Number of repetitions: 5
Command: Stop
Time: 0 s
After a one second delay the next Output
command will be executed that sets the relay in
Off position. Run time is set to 0 which means
the relay will stay on until the next Output
command will appear.
Stops the execution of the program for 1 second.
The Return to command undoes the execution
of the program to step 0 (the beginning of the
program). This cycle will be repeated five times
and then the next step of the program will be
executed.
Stop of the program execution. The next start of
the program will take place after the next power-
up of the controller.
20