Daikin VRV EMERION REYQ-AATJA Service Manual page 259

SiUS372201EB
No.
Item
1
Indoor unit Multi-tenant function setting
without power
90
Te target Used to make setting of targeted
temperature evaporating temperature upper
92
upper limit limit for cooling and heat recovery
operation.
Auxiliary heater Auxiliary heater is allowed to
maximum energize when the ambient
allowable temperature is smaller than the
temperature auxiliary heater maximum
allowable temperature.
97
Auxiliary heater Auxiliary heater is not allowed to
maximum energize when the outdoor air
allowable temperature is recovered by
98
temperature differential above the auxiliary
release heater maximum allowable
differential temperature.
1: Numbers in the No. column represent the number of times to press the BS button.
: Setting does not return to factory setting when exit mode 2. To cancel the function, change
: Once function is activated t01 appears. To stop current function, press once the RETURN
Part 5 Field Settings and Test Operation
Description
setting manually to factory setting.
(BS3) button. For detailed description about each setting, refer to Details of Setting Mode 2
on page 253.
Indication bold means factory setting.
7 segment
display
SEG SEG SEG
1 2 3
Invalid
Valid (No U4 error generation)
2. 9 0
Valid (Operating with U4
warning)
L
M
2. 9 2
H
–17.7°C (0°F)
–15°C (5°F)
–12.2°C (10°F)
–9.4°C (15°F)
–6.6°C (20°F)
–3.8°C (25°F)
–1.1°C (30°F)
1.6°C (35°F)
4.4°C (40°F)
2. 9 7
7.2°C (45°F)
10°C (50°F)
12.7°C (55°F)
15.5°C (60°F)
18.3°C (65°F)
Auxiliary heater always not
allowed
Auxiliary heater always
allowed
2.8°C (5°F)
5.6°C (10°F)
8.3°C (15°F)
2. 9 8
Field Setting from Outdoor Unit
7 segment
Description
SEG
1
display
Range
SEG SEG
2 3
0
1
2
0
1
2
0
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
0
1
2
252