Outline; Outline Of Functions - Mitsubishi Electric MELSEC-FX3S Series Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
FX -4DA-ADP (4-channel Analog Output)
3U
1.

Outline

This chapter outlines the FX
1.1

Outline of Functions

The FX -4DA-ADP is an analog special adapter. Which is connectable with the FX
3U
FX Series PLC to output the voltage/current data for up to 4 channels.
3UC
1) Only 1 4DA-ADP unit can be connected to the FX
*1
Up to 2 4DA-ADP units can be connected to the FX
Up to 4 4DA-ADP units can be connected to the FX
(including the other analog expansion boards, analog special adapters)
2) Either "voltage output" or "current output" can be specified for each channel.
3) The D/A conversion results will be automatically output as the values to the special data register of the
FX /FX /FX
3S 3G
FX Series PLC : Only 1
3S
FX /FX Series PLC : 2
3G 3GC
FX /FX Series PLC : 4 maximum
3U 3UC
including the other analog expansion
boards, analog special adapters
4th 3rd
adapter adapter
Analog data
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of
connectable units and to configure the entire system.
*1. Only 1 analog special adapter can be connected to the FX
*2. The expansion board is not required when connecting with the FX
For the FX /FX
3S 3G
*3. FX /FX /FX
3S 3G 3GC
For FX Series PLC
3S
• 1st adapter: M/D8280 to M/D8289
• 2nd, 3rd and 4th adapters: Cannot be connected
PLC User's Manual - Analog Control Edition
-4DA-ADP (referred to as 4DA-ADP).
3U
/FX /FX Series PLC.
3GC 3U 3UC
System
*1 maximum
+
Expansion
2nd 1st
board *2
adapter adapter
Transfer direction
Series PLC a connector conversion adapter is used.
PLCs use the following special devices.
Series PLC.
3S
/FX Series PLC.
3G 3GC
/FX Series PLC.
3U 3UC
FX /FX /FX /FX
3S 3G 3GC 3U
Series PLC
+
For FX /FX
3S 3G
FX /FX Series PLC
3U 3UC
Special devices
1st adapter
M/D8260 to M/D8269
2nd adapter M/D8270 to M/D8279
3rd adapter
M/D8280 to M/D8289
4th adapter
M/D8290 to M/D8299
Series PLC (14-point and 24-point type).
3G
/FX
3GC
For FX /FX
3G 3GC
• 1st adapter: M/D8280 to M/D8289
• 2nd adapter: M/D8290 to M/D8299
• 3rd and 4th adapters: Cannot be connected
1.1 Outline of Functions
/FX /FX
3S 3G
Point and section to be
referred to
Number of connectable

units
/FX
3UC
To check the connectable
 PLC model number, refer
to Section 1.3.
For a detailed
description of wiring,

refer to Chapter 3.
/FX /
3GC
For a detailed description
of special devices, refer to
*3

Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
(D, DS, DSS) PLC.
3UC
Series PLC
1 Outline
A
B
/FX /
3GC 3U
C
D
E
F
G
H
I
J
F-3