Mitsubishi Electric MELSEC-FX3S Series Manual page 316

FX /FX /FX /FX /FX
3S 3G 3GC 3U
FX -1DA-BD (1-channel Analog Output)
3G
• FX Series PLC
3G
*1
2 maximum
including other analog expansion
boards, analog special adapters.
Board B
Analog data
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of connectable
units and to configure the entire system.
*1. Only 1 analog board can be connected to the FX
G-4
PLC User's Manual - Analog Control Edition
3UC
System
Board A
Connected to the option connector 1
Connected to the option connector 2
Transfer direction
FX Series PLC
3G
For FX Series PLC
3G
Special devices
Board A M/D8260 to M/D8269
M/D8270 to M/D8279
Board B
Series PLC (14-point and 24-point type).
3G
1 Outline
1.1 Outline of Functions
Point and section to be
referred to
Number of connectable

units
To check the connectable

PLC model number, refer
to Section 1.3.
For a detailed
 description of wiring,
refer to Chapter 3.
For a detailed description
 of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.