Setup Procedure Before Starting Operation - Mitsubishi Electric MELSEC-FX3S Series Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U
FX -3A-ADP (2-channel Analog Input, 1-channel Analog Output)
3U
1.2

Setup Procedure Before Starting Operation

Before starting analog input / output using the 3A-ADP, follow the procedure below to set up the system:
FX
Specifications check
System configuration and selection
Programming
Changing of input/output characteristics
If the error status data or the input/output analog
value is abnormal, refer to Chapter 6
"Troubleshooting."
H-4
PLC User's Manual - Analog Control Edition
3UC
-3A-ADP
3U
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the
common pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Refer to Chapter 5.
1.2 Setup Procedure Before Starting Operation
Outline of system:
• Compatible PLC version number
• Compatible programming tool version number
Specifications:
• Operation environment
• Performance specifications
• Input/output characteristics
System configuration:
(Refer to the common pages for analog control.)
• Selection of units
Wiring:
• Selection of sensor cable
• Power supply line
• Analog input/output line
Programming:
• Details of special devices
• Examples of basic programs
Method of input/output characteristics change
• Convenient function program
• How to use scaling instruction
1 Outline