Changeover Of Range - Fuji Electric ZAF-6 Instruction Manual

6.4 Changeover of range (When 2 ranges have been selected)
This mode is used to select the ranges of measured components.
(1) During measurement, press the
Point the cursor to "Changeover of
(2)
appears, press the
over the range.
(3)
or the
range selected.
screen.
To close Zero Calibration
To close the "Changeover of range setting
process." or cancel this mode midway,
press the key.
ESC
A previous screen will return.
INZ-TN6ZAF-E
key to
MODE
key.
ENT
key to change
ENT
key and press the key.
ENT
User Mode Select an item
with UP/DOWN and ENT
Setting about Calibration
Alarm Setting
Setting of Auto Calibration

Changeover of Range

Parameter Setting
Range Change ENT : Select range
ESC : Back
Range1
H
2
Range2
Range Change Select range
with UP/DOWN and ENT
Back with ESC
Range1
H
2
Range2
0–3 vol%
0–100 vol%
0–3 vol%
0–100 vol%
33