Fuji Electric ZAF-6 Instruction Manual page 47

6.6.4 Station No. setting (When RS232C transmission has been selected)
(1) Press the key in measurement state to
MODE
or the
No." and then press the
appears, enter the station No. by pressing the
, or the
To close "Station No. setting"
To close the "Station No. setting" or cancel
this mode midway, press the
A previous screen will return.
40
key.
ENT
key, and press the key.
ENT
key.
ESC
Maintenance Select operating item
Mode
1. Sensor Input Value
2. Error Log
3. Password Setting
4. Station No. 01
5. Setting of Digital Out
6. Cal. history
7. To Factory Mode
Maintenance Set Station No.
Mode Allowable 00 to 31
1. Sensor Input Value
2. Error Log
3. Password Setting
4. Station No. 01
5. Setting of Digital Out
6. Cal. history
7. To Factory Mode
INZ-TN6ZAF-E