Maintenance Mode - Fuji Electric ZAF-6 Instruction Manual

6.6 Maintenance mode

"
•
(1) During measurement, press the
display the user mode.
Point the cursor to "Parameter settng".
Press the
ENT
pears, point the cursor to "Maintenance
Mode".
Press the
ENT
as "0000" and press the
INZ-TN6ZAF-E
key to
MODE
key.
-
key.
key.
ENT
User Mode Select an item
with UP/DOWN and ENT
Setting about Calibration
Alarm Setting
Setting of Auto Calibration
Changeover of Range
Parameter Setting
Parameter Select setting item
Setting
Current Date 2013-07-08
Current Time MON 16 : 19
Kye Loc OFF
Back Light ON 99min
Output Hold OFF
Response Time 01 sec.
To Maintenance Mode 0000
Parameter Input Password to
Setting Maintenance Mode
Current Date 2013-07-08
Current Time MON 16 : 19
Kye Loc OFF
Back Light ON 99min
Output Hold OFF
Response Time 01 sec.
To Maintenance Mode 0000
-
37