3.3 Piping
DANGER
In piping, the following precautions should be observed. Wrong piping may cause gas leakage.
If the leaking gas contains a toxic component, there is a risk of serious accident being induced.
• Connect pipes correctly referring to the instruction manual.
• Exhaust from the analyzer should be relieved in the atmospheric air in order that an unnecessary
disconnected to cause gas leakage.
• The pipes should be connected to the gas inlet and outlet at the rear panel of the analyzer,
respectively.
or soft vinyl tube. Analyzer indication may become inaccurate due to the adsorption of gases.
quick response. Pipe of ø 4mm (inside dianeter) is recommendable.
To prevent this, be sure to use clean pipes and joints.
INZ-TN6ZAF-E
7