Mechanical Requirements; Safety Specifications - Eizo SCD 19102 Instructions For Use Manual

10.8 Mechanical requirements

Operation
Vibrations
Shock
Packed unit
Vibrations
Shock

10.9 Safety specifications

Safety standards
Protection class
Degree of protection according to DIN 40050
Conformity
CAUTION
Subsequent installation of a stand
The SCD / SMD 19102 C and SCD / SMD 19102 CP monitors are delivered without a
stand. To ensure that a system comprising a monitor and base meet the requirements of
standard EN 60601, select a stand for subsequent installation that meets this standard.
SCD 19102 / SMD 19102
Instructions for Use, 08/2015
10.8 Mechanical requirements
According to EN 60068-2-6
10 ... 58 Hz at ± 0.075 mm deflection
58 ... 500 Hz at 10 m/s²
According to EN 60068-2-27 (single impact)
150 m/s², 6 ms
Under operating conditions, the device must not
be exposed to continuous or repeated shocks.
According to EN 60068-2-6
5 ... 9 Hz at ± 3.5 mm deflection
9 ... 500 Hz at 10 m/s²
According to EN 60068-2-27 (single impact)
250 m/s², 6 ms (in storage packaging)
to EN 60068-2-29 (continuous shocks)
• IEC 60601-1 +A1:1991 + A2:1995
• IEC 60601-1:2005 +CORR.1 (2006) +
CORR. 2 (2007)
• CAN/CSA C22.2 No. 601.1-M90
• CAN/CSA C22.2 No. 60601-1:08
• UL60601-1, 1st edition
• ANSI/AAMI ES60601-1:2005 / A2:2010
Protection class I
IP20
CE according to MDD 93/42/EEC (Class I)
Technical specifications
75