Eizo SCD 19102 Instructions For Use Manual page 26

1.3 mp 19" lcd monitor

Hide thumbs Also See for SCD 19102:

Table of Contents

Connecting

5.9 Serial interface

* Photometer is a generic term for the measuring instrument suggested by EIZO GmbH Dis-

play Technologies:

•

Advanced Serial Luminance Meter with adapter from 9-pin Sub-D to 6-pin mini-DIN

socket **.

** Service mode! Not permitted in the patient environment.

If the monitor connection is made via the serial bus (see Fig. "Possible configuration – serial

bus mode"), the setting "Serial bus" must first have been activated using "On Screen Dis-

play → Servicelevel 2 → Others". In this case (also under "On Screen Display → Servicelevel

2 → Others") the bus address has to be assigned for each device (1, 2, 3, etc. - assign differ-

ent numbers for the monitors connected via the same bus connection).

Settings, measurements, calibration, and automated quality tests can be performed using

QA software.

Smd 19102