Startup
6.4 System settings
Timing successfully set
The unknown timing has been successfully set, you can now exit the OSD menu. The moni-
tor will recognize the newly set timing and set it as saved whenever connected.
Note
Once all settings in Force Mode have been performed, the zoom factor can be set in the
"Position / Zoom" menu.
Saving of several timings
Save the timings in the OSD menu "Servicelevel 2 → User / Custom settings".
Up to five timings can be saved.
1. Select the storage number via "Custom settings number".
2. Save the timing by selecting "Save custom settings" and execute with key 2.
3. The saved timing is now identified by a "1" in "Save custom settings".
The location in the "Save custom settings" number where the 1 is set depends on the
selected "Custom settings number". For example, if you have selected "1" as the "Cus-
tom settings number", the 1st position of "Save custom settings" us set to "1".
Saved timings can be overwritten at any time.
64
SCD 19102 / SMD 19102
Instructions for Use, 08/2015