Eizo SCD 19102 Instructions For Use Manual page 46

Start­up
6.3 Description of OSD menu
Servicelevel 2
Force Mode
Temperature
46
Function Adjustment /
setting range
Execute
Blind mode
Live mode Execute
Help Execute
Temperature 25 °C ... 90 °C
limit
Default: 60 °C
25 °C ... 90 °C
Shutdown tem-
perature
Default: 70 °C
For SCD 19102: Information
Operation time
above 160 cd
For SMD 19102:
Operation time
above 400 cd
For SCD 19102: Information
Operation time
below 160 cd
For SMD 19102:
Operation time
below 400 cd
Description
Force Mode is a tool for setting
unknown timing that is not dis-
played via Exact Modes that
have already been stored.
Suitable for direct entry of Force
Mode data that have already been
determined.
Note: See Monitor adjustment -
Force Mode [} 54]
Force Mode is a tool for setting
unknown timing that is not dis-
played via Exact Modes that
have already been stored.
Suitable for step-by-step setting of
an unknown timing or for fine ad-
justment of a timing whose data
have been entered using "Blind
mode".
Note: See Monitor adjustment -
Force Mode [} 54]
Short description of the Force
Mode functions
Temperature beginning at which
the monitor is dimmed
Temperature beginning at which
the monitor is switched off
Operating hours meter
Operating hours meter
SCD 19102 / SMD 19102
Instructions for Use, 08/2015