Download  Print this page


Please read PRECAUTIONS, this User's Manual and Setup Guide
(separate volume) carefully to familiarize yourself with safe and effective
• Please read the Setup Guide (separate volume)
• The latest User's Manual is available for download from our site:


Table of Contents

   Related Manuals for Eizo FLEXSCAN S2433W

   Summary of Contents for Eizo FLEXSCAN S2433W

  • Page 1 Important Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site:
  • Page 2 EIZO NANAO CORPORATION’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
  • Page 3: Notice For This Monitor

    Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
  • Page 4: To Use The Monitor Comfortably

    Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. [LCD Panel] • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. •...
  • Page 5: Table Of Contents

    2-16 Enabling/Disabling DDC/CI communication .. 26 2-17 Setting Power Indicator ON/OFF [Power Indicator] ... 26 2-18 Setting Language [Language] ... 26 2-19 Setting EIZO logo display ON/OFF ... 26 2-20 Resuming the Default Setting [Reset] ... 27 ● To reset color adjustment values ... 27 ●...
  • Page 6 CONTENTS Chapter 5 Reference ... 34 Attaching an Arm ... 34 Folding the EZ-UP stand ... 35 5-3 Specifications ... 36 Glossary ... 42 Preset Timing ... 44 FCC Declaration of Conformity ... 45 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor ... 46 Hinweis zur Ergonomie ...
  • Page 7: Chapter 1 Features And Overview

    Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • 24” wide format LCD Applicable to WUXGA (1920×1200) • Built-in speakers and headphone jack 1-2 “Controls and Functions” (page • Power saving function Suppressing the power consumption* This product is equipped with various power saving functions.
  • Page 8: Controls And Functions

    Headphone jack Security lock slot Option speaker (i·Sound L3) mounting holes * ScreenManager is an EIZO’s nickname of the Adjustment menu. See ® Chapter 1 Features and Overview Detects ambient brightness. Auto EcoView function (page Allows you to switch the Auto EcoView function On or Off Displays the EcoView index (page 22).
  • Page 9: Compatible Resolutions/frequencies

    1-3 Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input (D-Sub) Resolution Frequency 640 × 480 ~75 Hz 720 × 400 70 Hz 800 × 600 ~75 Hz 1024 × 768 ~75 Hz 1152 × 864 75 Hz 1280 × 960 60 Hz 1280 ×...
  • Page 10: Functions And Basic Operation

    1-4 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 12 for operation) [At analog signal input] [At digital signal input] • The Adjustment menu and the FineContrast mode name cannot be displayed at the same time. FineContrast mode Color Adjustment Simple Adjustment [FineContrast mode]...
  • Page 11 ● Setting Language [Language] ● Locking Buttons ……………………… see ● Enabling/Disabling DDC/CI communication [DDC/CI] ……………………………… see ● Setting EIZO logo display ON/OFF … see ● Adjusting the DVI Input Level [DVI Input Level] ……………………… see for operation) Power-save Settings ● Setting On/Off for Power Saving mode [Power Save] ………………………see...
  • Page 12: Basic Operation Of Adjustment Menu

    Basic operation of Adjustment menu [Displaying Adjustment menu and selecting function] (1) Press . The Main menu appears. (2) Select a function with (3) Select a function with (4) Adjust the selected item with [Exiting Adjustment menu] (1) Choose <Return> from the Sub menu and press (2) Choose <Exit>...
  • Page 13: Chapter 2 Settings And Adjustments

    Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” file on the disk for software startup procedures or file access procedures.
  • Page 14: Screen Adjustment

    If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments according to the procedures on the following pages. When the screen is displayed correctly, go to step 5 “To adjust color gradation automatically [Range]”. Prepare the display pattern for the analog display adjustment. Load the “EIZO LCD Utility Disk” to your PC, and then open the screen adjustment pattern files. Chapter 2 Settings and Adjustments (page 17) and , and press Attention •...
  • Page 15 Perform the auto adjustment again with the analog screen adjustment pattern displayed. ● To adjust flickering, screen position, and screen size automatically [Screen] (1) Display Pattern 1 of the screen adjustment pattern files in full screen on the monitor. (2) Choose <Screen> from the <Auto Adjustment> menu, and press The <Auto Adjustment>...
  • Page 16 ● To correct screen position [Position] (1) Choose <Position> from the <Screen> menu, and press The <Position> menu appears. (2) Adjust the position with properly in the display area of the monitor, and press The adjustment is completed. Adjust the color gradation. ●...
  • Page 17: Color Adjustment

    2-3 Color Adjustment ● To select the display mode (FineContrast mode) FineContrast allows you to select the best display mode easily according to the monitor’s application. FineContrast mode Mode Available to change all setting values. Custom Allows the brightness to be set lower than possible with EyeCare other modes. Suitable for color matching with sRGB compatible sRGB peripherals. Suitable for displaying texts for word processing or Text spreadsheets.
  • Page 18: To Perform Advanced Adjustments

    ● To perform advanced adjustments Independent setting and saving of color adjustment are available for each FineContrast mode. ● Adjustment items in each mode According to the FineContrast mode selected, the adjustable function differs. √ : Adjustment available −: Invalid for adjustment Icon Function Custom EyeCare...
  • Page 19: To Adjust The Color Temperature [temperature]

    ● To adjust the color temperature [Temperature] The color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). In the same way as the flame temperature, the image on the monitor is displayed reddish if the color temperature is low and is bluish if the color temperature is high.
  • Page 20: To Adjust The Hue [hue]

    ● To adjust the hue [Hue] This function allows you to adjust the hue. If you set the hue to a high value, the image turns greenish. If low, the image turns purplish. Adjustable range: -32 to 32 (1) Choose <Color> from the Adjustment menu, and press (2) Choose <Hue>...
  • Page 21: Turning Off The Audio Output At Power Saving Mode [power Save]

    2-6 Turning off the audio output at Power Saving mode [Power Save] This monitor allows you to turn off the audio output from the speakers/ headphone at the power saving mode. (1) Choose <Sound> from the Adjustment menu, and press (2) Choose <Power Save>...
  • Page 22: Turning Off The Monitor Automatically [off Timer]

    [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. Monitor Operating Operating Power saving Power saving 2-9 Turning off the monitor automatically [Off Timer] This function allows you to switch the setting to turn off the monitor automatically after a specified time has passed at the power saving mode.
  • Page 23: Screen Size Selection

    2-11 Screen Size Selection ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Others> menu. Menu Displays an image in full screen.
  • Page 24: Setting Adjustment Menu Display

    2-12 Setting Adjustment Menu Display ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Menu Settings> from the <Others> menu, and press (3) Choose <Menu Size>...
  • Page 25: Setting Orientation

    2-13 Setting Orientation ● To set the orientation of the Adjustment menu [Orientation] This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Orientation>...
  • Page 26: Enabling/disabling Ddc/ci Communication

    (2) Press down to turn on the monitor. holding The EIZO logo display setting is toggled by performing the operation in step 2. Chapter 2 Settings and Adjustments , and press , and press NOTE •...
  • Page 27: Resuming The Default Setting [reset]

    2-20 Resuming the Default Setting [Reset] There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. ● To reset color adjustment values Only the adjustment values in the current FineContrast mode will revert to the default settings (factory settings).
  • Page 28: Chapter 3 Connecting Cables

    Chapter 3 Connecting Cables 3-1 Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the D-Sub mini 15 pin, the DVI-D and the DisplayPort connector on the back of the monitor. Connection examples D-Sub mini DisplayPort...
  • Page 29: To Set Input Signal Selection [input Signal]

    ● To set input signal selection [Input Signal] The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Priority setting Auto When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal.
  • Page 30: Connecting Peripheral Usb Devices

    (1) A PC equipped with a USB port or another USB hub connected to a USB compatible PC (2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later (3) EIZO USB cable (MD-C93) ● Connection Procedure (Setup of USB Function) (1) Connect the monitor first to a PC using the signal cable, and run the PC.
  • Page 31: Chapter 4 Troubleshooting

    Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems (digital input) → See No.3 - No.8. • Imaging problems (analog input) → See No.3 - No.12. •...
  • Page 32 Problems Characters are blurred. Afterimages appear. Green/red/blue/white dots or defective dots remain on the screen. Interference patterns or pressure marks remain on the screen. Noise appears on the screen. Display position is incorrect. 10. Vertical bars appear on the screen or a part of the image is flickering.
  • Page 33 Problems 16. No audio output. 17. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. Possible cause and remedy • Check whether the mini jack cable is correctly connected. • Check whether volume is set to 0. • Check the setting of the PC and the audio playback software. • During DisplayPort signal input, check the [Source] setting. (see page • Check whether the USB cable is connected correctly.
  • Page 34: Chapter 5 Reference

    The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
  • Page 35: Folding The Ez-up Stand

    5-2 Folding the EZ-UP stand Perform the following procedures to fold the stand when re-packing a monitor with an EZ-UP stand. Remove the cable holder. Lower the monitor screen position until the hinge of the stand touches the stand base, and attach the lock metal fitting. Adjust the monitor angle so as the monitor screen not to touch the stand base.
  • Page 36: Specifications

    5-3 Specifications LCD Panel Dot Pitch Horizontal Scan Frequency Vertical Scan Frequency Resolution Max. Dot Clock Max. Display Color Display Area (H × V) Power Supply Power Screen Display On Consumption Power saving mode Power button Off Main Power switch Off Input Signal Connector Analog Input Signal (Sync) Analog Input Signal (Video) Digital Signal (DVI-D) Transmission System...
  • Page 37 Mass Main unit (including Height adjustable stand) Main unit (including EZ- UP stand) Main unit (including FlexStand) Main unit (without stand) Approx. 7.2 kg (15.9 lbs.) Movable range Height adjustable stand EZ-UP stand FlexStand Environmental Temperature Conditions Humidity Pressure Standard Port Supply current Main default settings (factory settings) Auto EcoView Smoothing FineContrast Mode PowerManager Input Signal Screen Size Off Timer...
  • Page 38: Outside Dimensions

    Outside Dimensions Height adjustable stand 532(20.9) 168(6.6) SWIVEL 240.5(9.5) 325(12.8) 566(22.3) 22.8(0.9) 520.4(20.5) 22.8(0.9) PIVOT EZ-UP stand 532(20.9) 129.3(5.1) SWIVEL 566(22.3) 22.8(0.9) 520.4(20.5) 22.8(0.9) PIVOT Ø272(10.7) Chapter 5 Reference 287.5(11.3) 20(0.79) 208.5(8.2) 64.3(2.53) 27.7(1.09) 279.9(11) 307.6(12.1) unit : mm (inch) 233(9.2) 100(3.9) 233(9.2) unit : mm (inch) 233(9.2) 100(3.9)
  • Page 39 FlexStand 532 (20.9) unit : mm (inch) 95 (3.74) SWIVEL 566 (22.3) 22.8 (0.9) 22.8 (0.9) 520.4 (20.5) 233 (9.2) 100 (3.9) 233 (9.2) PIVOT TILT 8.5 (0.33) 36 (1.42) φ220 (8.7) 242 (9.5) 235.5 (9.3) 256 (10.1) Chapter 5 Reference...
  • Page 40 Connector Pin Assignment • DVI-D connector Pin No. Signal T.M.D.S. Data 2- T.M.D.S. Data 2+ T.M.D.S. Data2/4 Shield DDC Clock (SCL) DDC Data (SDA) • D-Sub mini 15-pin connector Pin No. Signal Red video Green video Blue video Ground • DisplayPort connector Pin No. Signal ML Lane3- Ground...
  • Page 41 Accessories List Cleaning Kit Speaker Unit Signal Cable * May not allowed to attach the option speaker depending on the stand type. For the latest information about the accessories, refer to our web site. Remarks Cable power Serial data Serial data Cable ground EIZO ScreenCleaner i•Sound L3*...
  • Page 42: Glossary

    5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
  • Page 43 Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920×1200, all pixels are illuminated as a full screen (1:1). sRGB (Standard RGB) International standard for “color reproduction and color space”...
  • Page 44: Preset Timing

    5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA TEXT 28.3 MHz 720×400@70Hz VESA 640×480@73Hz 31.5 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@56Hz 36.0 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@72Hz 50.0 MHz...
  • Page 45: Fcc Declaration Of Conformity

    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) This Class B digital apparatus complies with Canadian ICES-003.
  • Page 46: Hinweise Zur Auswahl Des Richtigen Schwenkarms Für Ihren Monitor

    Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß muß den nachfolgenden Anforderungen entsprechen: a) Der Standfuß...
  • Page 47 本标识根据「电子信息产品污染控制管理办法」 ,适用于在中华人民共和国销售的电子信息产品。 标识中央的数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制 造日起算的年限内,不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 (Pb) 印刷电路板 机箱 液晶显示器 其他 ○ :表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。( 企业可 × : 在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) 关于电子信息产品污染控制标识 有毒有害物质或元素 铅 汞 镉 (Hg) (Cd) × ○ ○ ○ ○...

Comments to this Manuals

Symbols: 0
Latest comments: