Setup And Installation; Installation Site - Eizo SCD 19102 Instructions For Use Manual

4 Setup and installation

CAUTION
Changes to device
Do not make any mechanical or electric changes to the device.
EIZO GmbH is not liable for changes made to the device.

4.1 Installation site

Provide adequate ventilation
Ventilation slots are located on the rear of the housing.
The distance at the rear must be at least 10 cm from a wall or 15 cm from other devices.
Unimpeded access to the power switch
NOTICE
The power switch and connections must be accessible at all times
When installing and connecting the monitor, ensure that the power switch and the connec-
tions are accessible at all times.
Observe the permissible ambient temperature range
The device must operate within the permissible ambient temperature range.
Desktop installation
If the monitor is installed on a stand, it must be positioned on a hard, horizontal surface.
Avoid reflections on the screen
The monitor has an anti-glare surface which is only effective if the screen is clean and
grease-free.
The SCD 19102 CP and SMD 19102 CP monitors have an optically coated protective glass
pane, which is well suited for use in a germ-free environment when cleaning agents are
used.
If the screen surface is dirty, clean it using a suitable microfiber cloth.
Comply with the specifications for
The monitor should be positioned so that reflections of lights, windows, furniture with shiny
surfaces, or light-colored walls do not appear on the screen.
In order to reduce reflections on the monitor, only use non-dazzling reflector bulbs for the
ceiling lighting.
SCD 19102 / SMD 19102
Instructions for Use, 08/2015
Cleaning [} 68].
Setup and installation
4.1 Installation site
15