Entering known timing data and fine adjustment
1. Open a test pattern with a clearly defined border (e.g. SMPTE image).
2. Open the "Blind mode" menu: Main menu → Servicelevel 2 → Force Mode → Blind mode.
3. Enter the timing data into the individual input fields using the Menu, Up and Down keys.
4. Select either "For static pictures" or "For motion pictures" in line 6 in the "Blind mode"
menu and confirm using key 2.
5. Execute the "Force"
Note: For progressive timings with an image refresh rate greater than 60 Hz, only the
items "For static pictures" or "Reset" can be selected in line 6 in the "Blind mode" menu.
SCD 19102 / SMD 19102
Instructions for Use, 08/2015
command using key 2.
Startup
6.4 System settings
57