Eizo SCD 19102 Instructions For Use Manual page 31

Main menu
Position / zoom (not
for analog picture sig-
nal)
Picture source
SCD 19102 / SMD 19102
Instructions for Use, 08/2015
Function Adjustment /
setting range
0 ... 100 %
H position
0 ... 100 %
V position
1 to 1
Zoom
Fill all
Fill ratio
Fill to square
Default: Fill all
Select source for main display
Selection of picture source for full format image.
If you call this OSD menu, the current source is displayed.
SCD 19102:
VGA
DVI Digital
Composite
S-Video
DVI Analog
SMD 19102
VGA
DVI Digital
Composite
S-Video
SoG / H / V
6.3 Description of OSD menu
Description
Shift picture in horizontal direc-
tion
With identical monitor and graphics
card settings, the complete picture
to be displayed fills the display area
of the monitor with the exact num-
ber of pixels.
Shift picture in vertical direction
With identical monitor and graphics
card settings, the complete picture
to be displayed fills the display area
of the monitor with the exact num-
ber of pixels.
Selection between different pic-
ture size settings:
• 1 to 1:
The picture is displayed on
screen with its original resolu-
tion.
• Fill all:
The picture is displayed to fill the
complete screen (1280 x 1024
pixels).
• Fill ratio:
The picture is zoomed to the
maximum screen area with re-
tention of the aspect ratio.
Square:
•
The picture is zoomed to square
format.
After switching the monitor off and
on again, the image sources are
queried in sequence.
Note: Alternatively, the source can
be selected through a hot key func-
tion (see the OSD menu → Others →
OSD setting).
Start­up
31