Crankshaft Installation - KYMCO DINK50 Service Manual

10
. CRANKCASE/CRANKSHAFT
Measure the crankshaft runout.
Service Limit
A
0.150mm
replace if over
Check the crankshaft bearings for excessive
play. The bearings must be replaced if they
are noisy or have excessive play.

CRANKSHAFT INSTALLATION

Wash the crankshaft in cleaning solvent and
then check for cracks or other faults.
＊
• After check, apply clean engine oil to
all moving and sliding parts.
• Remove all gasket material from the
crankcase mating surfaces. Dress any
roughness or irregularities with an oil
stone.
10-5
www.PlanDeGraissage.org
B
0.100mm
replace if over
Play
Axial
Radial
Play