Throttle Valve Installation - KYMCO DINK50 Service Manual

12
. CARBURETOR/FUEL PUMP
Remove the jet needle by removing the
needle clip.
Check the jet needle and throttle valve for
wear or damage.
THROTTLE VALVE INSTALLA-
TION
Install the jet needle on the throttle valve
and secure with the needle clip.
Install the rubber seal on the throttle cable
and then install the carburetor cap and
throttle valve spring.
Connect the throttle cable to the throttle
valve.
www.PlanDeGraissage.org
Jet Needle
Throttle
Valve
Rubber Seal
Throttle Valve Spring
Throttle Valve
Throttle Cable
Needle Clip
Needle Retainer
2nd Notch (STD)
Carburetor Cap
12-4