KYMCO DINK50 Service Manual page 135

11
. COOLING SYSTEM
Remove the three bolts and the water pump
cover, gasket and 1 dowel pins.
Remove the three bolts attaching the right
crankcase cover and the cover.
Remove the water pump impeller.
Inspect the mechanical (water) seal and
inner bearing for wear or damage.
＊
The mechanical seal and inner bearing
must be replace as a set.
11-9
www.PlanDeGraissage.org
Bolts
Impeller
Mechanical Seal
Impeller
Disk water pump
Water Pump Cover