KYMCO DINK50 Service Manual page 220

20
. HIGH-SPEED TIRE
PRECAUTIONS FOR HIGH SPEED
TIRE STORAGE
STORAGE METHODS
If the space within the tire bead of a
high-speed tire is narrower than the
width of its rim, it is hard to install
the tire to the rim and pump air into
the tire. Therefore, it is better to put
cardboard within the tire bead and
put tires in order.
Tires deform easily if they are piled
horizontally. Avoid doing so.
As to the reused tires, the structure
of the rim remains the same. Install
the valve cap when the tire pressure
is lowered to 1/2 of the specified
pressure.
PLACE FOR STORAGE
The place used for storage should
avoid the following conditions:

A place where produces
ozone (a place near motors
or chargers)

A place with direct sunshine
www.PlanDeGraissage.org

A place where produces
heat (a place near stoves
or steam pipes)

A place with high moisture
Cardboard

A place with oils or
lubricants (especially in
service working area)
20-4