Rear Shock Absorber - KYMCO DINK50 Service Manual

14
. REAR WHEEL/REAR BRAKE/REAR
SHOCK ABSORBER

REAR SHOCK ABSORBER

REMOVAL
Remove the rear carrier. (  2-3)
Remove the met-in box. (  2-3)
Remove the air cleaner case. (  5-2)
Remove the rear shock absorber upper and
lower mount bolts to remove the rear shock
absorber.
DISASSEMBLY
Install the rear shock absorber compressor
as the figure shown.
＊
Install the rear shock absorber lower
joint into the rear shock absorber
compressor.
Compress the rear shock absorber spring.
Loosen the lower joint lock nut.
Remove the lower joint.
Remove the lock nut, rubber and damper.
14-7
www.PlanDeGraissage.org
Upper Mount Bolt
Lower Mount Bolt
Rear Shock Absorber Compressor
Rear Shock Absorber Remover
Rear Shock Absorber
Lock Nut