Oil Pump Installation - KYMCO DINK50 Service Manual

4
. LUBRICATION SYSTEM

OIL PUMP INSTALLATION

＊
• Lubricate the O-ring with grease or
engine oil before installation.
• Make sure that the oil pump is
inserted into the crankcase.
• Apply molybdenum disulfide or grease
to the pump pinion.
Install the oil pump onto the crankcase.
Install the oil pump control cable plate.
Connect the oil inlet line and oil outlet line
properly.
Connect the oil pump control cable.
Bleed air from the oil pump.
www.PlanDeGraissage.org
Grease or Engine Oil
Control Cable Plate
Bolt
Oil Outlet Line
Control Cable
4-4