Advertisement
12.18 CABLIBRATION S/W INSTALLATION
Uniformity Calibration (XVM-245W)
To proceed to Panel Uniformity Calibration of XVM-245W,
please refer to the following.
Center: 980, Auto Move: Unchecked
After clicking the button, the Calibration Uniformity pop-up appears as below. Then
values as follows.
Center: 980, Auto Move: Unchecked
Fig 15 Calibration Uniformity
Fig 16 Calibration Uniformity Dialog
Advertisement
Need help?
Do you have a question about the LVM-074W and is the answer not in the manual?
Questions and answers