Advertisement
12.16 CABLIBRATION S/W INSTALLATION
Import Tab
1D LUT
This channel is used to apply the stored 1D LUT File to the monitor.
3D LUT
This channel is used to apply the stored 3D LUT File to the monitor.
CSC File
This channel is used to apply the stored CSC File to the monitor.
Gain & B/L
This channel is used to apply the File which stored Gain and Backlight
values to the monitor.
Fig 13 Setting LUT
36
Advertisement
Need help?
Do you have a question about the LVM-074W and is the answer not in the manual?