TVLogic LVM-074W Service Manual page 13

10. 1 PROGRAM UPDATE WITH ETHERNET
1) Monitor Settings
- In the OSD Menu -> REMOTE -> Enter IP Address, Subnet Mask, Gateway value.
* Changing the PORT NO. is not recommended.
* Enter the IP Address of the connected internet with monitor.
* PASSWORD feature is available with Ver. 1.0 and above.
- Leave the monitor on.
2) Upgrade program settings
- Run XVM_COMM.exe
Picture 1 : Monitor upgrade
- Enter the same IP address as entered for the monitor. (See Picture 2)
* Changing the PORT NO. is not recommended.
- When "CON TEST" button is pressed, Version number will appear in the
Ver. Box if connected properly. If not, "??" will appear in the box.
- If "??" appears, check the IP address for the monitor and program, then
try again.
SW=>
13