TVLogic SRM-095W-N Operation Manual

TVLogic SRM-095W-N Operation Manual

Multi format broadcast lcd monitor

Advertisement

Multi Format Broadcast

LCD Monitor

LVM-095W-N2
SRM-095W-N

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRM-095W-N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TVLogic SRM-095W-N

  • Page 1: Lcd Monitor

    Multi Format Broadcast LCD Monitor LVM-095W-N2 SRM-095W-N...
  • Page 3: Table Of Contents

    Contents 1. Caution 2. Main Features 3. Controls & Functions 4. Menu Tree & Adjustment 5. Menu Operations [1] Picture [2] Color [3] Marker [4] GPI/UMD [5] Waveform [6] Audio [7] Display & Set 6. Button Functions 7. Other Functions 8.
  • Page 4: Caution

    1. Caution • Always use set voltage. (DC 12~24V) • • Do not attempt to repair the product yourself. Removing covers can expose you to high • When using a DC Adapter other than the voltage and other dangerous conditions. one supplied by the manufacturer, please Request a qualifi ed service person to perform be advised that the adapter with...
  • Page 5 LCD screen may be stuck to show either always on (red, green, blue) or always off (black or dark). TVLogic guarantees more than 99.999% of the sub-pixels are operating normally and less than 0.001% of the sub-pixels may be defective.
  • Page 6: Main Features

    2. Main Features LVM-095W-N2 / SRM-095W-N Monitors contain the following features: • Compatible with various SDI signals • Pixel To Pixel Function - Used to display the original image resolution formats without scaling. - This product is compatible with various SDI signals - 480i, 576i, 720p, 1035i, 1080i, 1080p, •...
  • Page 7: Controls & Functions

    3. Controls & Functions LVM-095W-N2 / SRM-095W-N : FRONT CHROMA BRIGHT CONTRAST APERTURE VOLUME SOURCE MENU SPEAKER-LEFT SPEAKER-RIGHT SCAN POWER ASPECT ENTER MARKER DOWN H/V DELAY BLUE/MONO W-FORM/VECTOR LVM-095W-N2 / SRM-095W-N : REAR TALLY TALLY SDI-IN A/B REMOTE SDI-OUT RS-422 IN...
  • Page 8 3. Controls & Functions LVM-095W-N2 / SRM-095W-N : FRONT • [SDI] Button/Lamp • [BLUE]/[MONO] Button/Lamp - Used to select SDI-A/B input. - Activates in the order of [Off ]-[Blue Only]- [Mono]-[Off ] - Press the button to remove red and green •...
  • Page 9 3. Controls & Functions LVM-095W-N2 / SRM-095W-N : FRONT • [MENU] Button • [TALLY] Lamp - Used to activate the OSD menu. - Tally lamp that can be toggled in green or red - When the OSD menu is activated, press this using the REMOTE(RJ-45) port or RS-422 serial button to exit from the menu.
  • Page 10 3. Controls & Functions LVM-095W-N2 / SRM-095W-N : REAR • TALLY(LAMP) • USB - Interlocks with front tally lamp. - This terminal is used to upgrade the fi rmware or color calibration made by TVLogic. • SDI-A (BNC) • REMOTE (RJ-45) - HD/SD SDI signal input.
  • Page 11: Menu Tree & Adjustment

    • This Picture is the menu structure for 1. Press the MENU button to activate the OSD LVM-095W-N2 / SRM-095W-N menu. 2. Move to a desired menu with the UP/DOWN button. 3. Press the ENTER button to select a menu and move to a sub-menu with the UP/DOWN button.
  • Page 12: Menu Operations

    5. Menu Operations [1] Picture • NTSC Setup - This function is not supported since the LVM-095W-N2 / SRM-095W-N doesn’t support Analog input signal. • Knob Lock - Locks the Knob control Knob(Aperture, Bright, Chroma, Contrast, Volume). • Brightness - Used to set the brightness(=off set) level from -100 to 100.
  • Page 13: Color

    5. Menu Operations [2] Color • Gain Blue - Used to set Blue Gain(or Picture, Contrast) level from -256 to 255. * Only available in User 1/2/3 mode. • Bias Red - Used to set Red Bias(or Off set, mainly aff ects on Black level) from -100 to 100.
  • Page 14: Marker

    5. Menu Operations [3] Marker • Fit Marker - Used to activate or inactivate the Fit Marker function. - When the Marker type is selected in the Marker menu, a border line of the Safety Area will be displayed inside the Marker. Images below show the diff erence between Fit Marker On and Off .
  • Page 15 5. Menu Operations [3] Marker • User Marker H1 - Used to set the position of the fi rst horizontal marker line. - Displayed when Marker menu is set to User. • User Marker H2 - Used to set the position of the second horizontal marker line.
  • Page 16: Gpi/Umd

    5. Menu Operations [4] GPI / UMD - The selectable values are as follows : Menu Classifi - Settable Values cation None, HDMI CHANNEL, SDI-A CHANNEL, SDI-B CHANNEL TALLY RED, TALLY GREEN BLUE ONLY • This item activates/ deactivates the UNDERSCAN REMOTE function.
  • Page 17 - This function adjusts the size of UMD font and • Monitor ID UMD background. - Sets the ID of each monitor for the TVLogic - Available modes are Small and Large. control protocol or DYNAMIC UMD using RS- 422 communication.
  • Page 18: Waveform

    5. Menu Operations [4] GPI / UMD [5] Waveform • D-UMD Tally Type • Press [W-FORM/VECTOR] Button to - Tally type confi guration setting in D-UMD(D- activate the Waveform. 8C), UMD Display. - Confi guration values are Default, User • Waveform/Vector Color, Character, BG.
  • Page 19 5. Menu Operations [5] Waveform • Luma(Y’) Zone Check - Displays the Luma(Y’) level of the input image in colors. - May select between [Color Pattern] or [Zebra Pattern]. - Each pixel’s Y’ analized and changed to a certain color or zebra pattern according to the Index on the right side of the screen.
  • Page 20 5. Menu Operations [5] Waveform • C Max - Used to set the maximum chroma(C’) level from 0 to 255. - Pixels with values exceeding the min C’ level will blink in the screen, and display in red on the Waveform. •...
  • Page 21: Audio

    5. Menu Operations [6] Audio • Level Meter Display - Used to set the display method for audio level meter. - Available modes are Group and Pair. * In the HDMI mode, the mode is set to Pair. • Level Meter Reference - Display the default audio level meter value.
  • Page 22: Display & Set

    5. Menu Operations [7] Display & Set • 3G Format - Used to select 3G-SDI A/B input format among Normal Mode (Auto : A422 10Bit_YCbCr. 50/60p), A 444 10/12Bit_YCbCr, A 444 10/12Bit_RGB, A 422 12Bit_YCbCr, B 444 10/12Bit_YCbCr, B 444 10/12Bit_RGB, B 422 12Bit_YCbCr, B 422 10Bit_YCbCr 50/60p.
  • Page 23 5. Menu Operations [7] Display & Set • Closed Caption - This item selects Closed Caption. - Available modes are OFF, 708, 608(LINE21) and 608(ANC). * 608 : CEA-608-B, 708 : CEA-708-C standard display only. • TimeCode Enable - Used to set the time code among Off , VITC and LTC.
  • Page 24 5. Menu Operations [7] Display & Set • KeyLed Indication - Used to control the Key Lamp on the front of the monitor. - If the button with LED is pressed with the KEY LED Off , LED comes on but turns off after 3 seconds later.
  • Page 25: Button Functions

    6. Button Functions [1] SDI Input Button [2] SOURCE Button • LVM-095W-N2 / SRM-095W-N unit is • LVM-095W-N2 / SRM-095W-N unit is capable of processing dual SDI Input capable of processing Single HDMI and signal. CVBS Input signal. 1. Press the[SDI] button on the front of the 1.
  • Page 26 6. Button Functions [3] SCAN Button [5] Function Key Set Button • LVM-095W-N2 / SRM-095W-N supports • Used to make a quick setting of the various scan modes. Function Key. 1. Press [SCAN] button continuously to activate 1. Press the function button(F1~F3) on the various scan modes: OVER SCAN ->...
  • Page 27: Other Functions

    7. Other Functions [1] User Aspect • Used to adjust the Width /Height display ratio. 1. Press the [Aspect] button on the front of the monitor to activate the [USER ASPECT] mode. 2. After the activation, press the [ENTER] button to begin controlling.
  • Page 28 7. Other Functions [2] Waveform / Vectorscope • Waveform Y • Vectorscope - Displays the Luma(Y’) component of the input - Displays the color components ‘B-Y’ and signal into waveform. ‘R-Y’of the input signals onto the X-Y axis. - Two diff erent types of Vetorscopes are displayed according to SD or HD input signals.
  • Page 29 7. Other Functions [3] Line Select [4] Zoom (Waveform/Vectorscope) • Used to select specifi c Vertical Line for • Used to magnify the input signal from 0% Waveform / Vector. to 90%. - It is available when the Line Waveform is •...
  • Page 30 7. Other Functions [5] Luma(Y’) Zone Check • Color Pattern Type. • Zebra Pattern Type - Displays the Luma(Y’) level of the input image - Displays the pixels with designated Luma(Y’) in colors. levels with zebra pattern. - Y’ ≥ 100% : Pixels with higher Y’ level than 100 - Y’...
  • Page 31 7. Other Functions [6] Focus Assist [7] Range Error • Focus Assist function assigns a color to • Pixels with Y’ or C’ levels exceeding the the pixels on the boundaries of the image designated levels of Y MAX, Y MIN, C MAX to inform the user to achieve the and C MIN shall blink.
  • Page 32 If the circle is compared in Live/Rec Full mode, the output of the circle is deformed. 2. Both LVM-095W-N2 / SRM-095W-N connected DSLR and LVM-095W-N2 / SRM- 095W-N connected HDMI to SDI Conversion should be compared to cirlce in Zeroscan mode.
  • Page 33 7. Other Functions [9] HDMI To SDI Conversion-Out [10] Internal Pattern • Video source from ‘HDMI input’ terminal • Displays internally generated test can be output through ‘SDI throughout’ patterns. terminal. - The pattern consists of ColorBar and Pluge+Grayscale Patterns. Full screen ※...
  • Page 34 * During the update, the monitor screen is off , and nothing functions. * After the update, TVLogic logo shows up on the screen, and the monitor initializes. * Update can take 10~20min. depending on fi rmware kind.
  • Page 35: Product Specifi Cations

    8. Product Specifi cations LVM-095W-N2 Size 9” Resolution 1920 x 1080 (16:9) Pixel Pitch 0.1035 x 0. 1035 mm Color Depth 16.7M (Dithered 8bit) Viewing Angle H : 176 degrees / V : 176 degrees Luminance of white 400 cd/ m (Center) Contrast Ratio 750 : 1...
  • Page 36 8. Product Specifi cations SRM-095W-N Size 9” Resolution 1920 x 1080 (16:9) Pixel Pitch 0.1035 x 0. 1035 mm Color Depth 16.7M (True 8bit) Viewing Angle H : 176 degrees / V : 176 degrees Luminance of white 800 cd/ m...
  • Page 37: Optional Accessories

    9. Optional Accessories 9” 9” 9” Acrylic Protector Rack-Mountable Kit HDMI Bracket 7” 9” 9” 9” Camera Mount Ball Head Sun Hood Carryng Bag with Hood Multi Format LCD Monitor 37...
  • Page 38 MEMO 38 Multi Format LCD Monitor...
  • Page 40 FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv 12F, ACE HIGH-END TOWER 8, 84, Gasan digital 1-ro, Geumcheon-gu, Seoul, 08590, KOREA TEL : +82-70-8668-6611, FAX : 82-2-6123-3201, E-mail : sales@ t vlogic.co.kr...

This manual is also suitable for:

Lvm-095w-n2

Table of Contents