Advertisement
10.3 PROGRAM UPDATE WITH ETHERNET
Picture 4:
Update start message window
* Press the "OK" button to start updating.
Picture 5:
CONFIG SUCCESS message window
* "CONFIG SUCCESS" message window appear when update is finished.
-
CPU
* Select ARM/GEN for DEV in UPDATE PROCESS. Then, OPEN and select
the ARM/GEN firmware file.
* Press the SEND button to start transfer.
* Follow the above FPGA updating steps to finish the update.
=>
=>
15
Advertisement
Need help?
Do you have a question about the LVM-074W and is the answer not in the manual?
Questions and answers