Advertisement
11.3 PROGRAM UPDATE WITH USB
* Update will be proceeded after Download complete. Update status appears in
SIZE/MSG
* Update will be proceeded after Download complete. Update status appears in
SIZE/MSG
- CPU/GEN
* Select CPU/GEN type from check box in PROGRAM STATUS.
-CPU/GEN
* Select Bank0 from bank selection window. Then click on file open button to open
* Select CPU/GEN type from check box in PROGRAM STATUS.
firmware file for CPU/GEN.
* Select Bank0 from bank selection window. Then click on file open button to open
firmware file for CPU/GEN.
* Click on DOWNLOAD button to start download.
(Follow the FPGA updating steps to finish the update.)
* Click on DOWNLOAD button to start download. (Follow the FPGA updating steps
to finish the update.)
Selection
BANK0(extension)
BANK1(extension)
*** FPGA and CPU should be separately updated. ***
Picture 2: Download complete message window
FPGA_A(.bit)
X
UPDATE
CPU/GEN(.a79)
X
X
20
Advertisement
Need help?
Do you have a question about the LVM-074W and is the answer not in the manual?