Rational iCombi Pro Original Installation Instructions page 42

5 | Setup
5. Pull the floor unit downwards by the cooking cabinet door. Remove the
part of the pallet under the electrical compartment.
6. Install the unit with the rear feet on the installation surface.
7. Carefully lift the unit by the cooking cabinet door and pull out the pallet
under the unit.
8. Set down the unit with the front unit feet on the installation surface.
Align the floor unit
a
The unit is installed and is on the intended installation surface.
1. Place a spirit level in the cooking cabinet of the unit.
2. To align the unit horizontally on the right, turn the unit feet on the front
right and rear right.
42 / 100 80.06.083_iCombiPro-iCombiClassic_IM_en-US