4 | Transport
>
The right transport aid must rest on the right foot of the unit.
100 mm
(4 Inch)
4. Lift the floor unit using the lift truck.
5. Transport the unit onto the designated installation surface.
>>
The unit is set down on the designated installation surface and is ready for
setup.
4.4
Transport with lifting aid
Only transport the unit sizes 6 half size to 10 full size with the lifting aid.
Only original service parts may be used.
n
Check the lifting aid before use. Do not use the lifting aid if it is worn or
n
damaged.
Use the lifting aid as described. Changing, expanding or alternative use of
n
the lifting aid is not permitted.
The lifting aid may only be lifted by hand. It must not be used with other
lifting equipment.
Risk of crushing during setup
Fingers, hands and feet may be crushed under the unit.
Wear suitable protective clothing during setup.
n
Only lift the unit via the designated lifting points.
n
Risk of crushing and injury due to incorrect lifting with lifting aid
Hands, fingers or feet may be crushed.
24 / 100
CAUTION
CAUTION
80.06.083_iCombiPro-iCombiClassic_IM_en-US
Need help?
Do you have a question about the iCombi Pro and is the answer not in the manual?
Questions and answers