Encoder Audio Output Control - evertz 570J2K-HW-X19 User Manual

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Latency Mode: This dropdown menu allows the user to select the latency mode which can be
Standard or Ultra low.
Color Specification: This dropdown menu allows the user to specify the color space of the input video.
The options include Auto and HDR10 "REC 2020 SMPTE 2084". Auto will automatically look at the
input source PMT if an ASPEN input is provided and confirm if the output encoded stream requires the
PMT notification for HDR10. Forcing the mode to HDR10 will modify the PMT to reflect HDR10.
Total TS Bit Rate: This parameter allows the user to define the total TS bitrate in kbps.
Note: Card will adjust the bitrate for video and other pids based on these settings.
For Enc J2K the range is from 50000 to 300000kbps.
Max Video Bit Rate: This parameter reflects the maximum video bitrate used on the encoder.

5.6.2. Encoder Audio Output Control

Audio Number Of Channels: This control allows the user to define the number of channels for the
audio. The options include 2 channels per pid or 4 channels per pid.
Bits Per Sample: This control allows the user to select the number of bits per samples. The options
include 20 bits or 24 bits.
Audio Enable PID<1-4>: This control allows the user to enable/disable the audio PID.
Page - 22
Revision 1.0