Bender ISOMETER isoCHA425HV Manual page 49
Hide thumbs
Also See for ISOMETER isoCHA425HV:
- Manual (46 pages) ,
- User manual (13 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Single cables for terminals Up, AK1, GND, AK2
Requirement for connecting cables between ISOMETER® and AGH
Cable lengths
Connection properties
6.4
Standards and certifications
The ISOMETER® was developed in compliance with the following standards:
• IEC 61851-23 Edition 1.0 2014-03
• IEC 61851-21-2: 2018-04 Version 1.0
• IEC 61557-8 Edition 3.0 2014-12
• DIN EN 61557-8:2015
• UL 2231-1 Edition 2 2012-09 Rev 2021-09
• UL 2231-2 Edition 2 2012-09 Rev 2020-12
EU Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that the device covered by the Radio Directive complies with
Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet
address:
https://www.bender.de/fileadmin/content/Products/CE/CEKO_isoXX425.pdf
UKCA Declaration of Conformity
Hereby, Bender GmbH & Co. KG declares that this device is in compliance with Radio Equipment Regulations
2017 (S.I. 2017/1206). The full text of the UK declaration of conformity is available at the following internet
address:
https://www.bender.de/fileadmin/content/Products/UKCA/UKCA_isoXX425.pdf
isoCHA425HV_D00404_04_M_XXEN/10.2023
ISOMETER® isoCHA425HV
≤ 0.5 m
≥ 0.75 mm
2
49
Advertisement
Table of Contents
Need help?
Do you have a question about the ISOMETER isoCHA425HV and is the answer not in the manual?