Clinical Resources Library Creating User Protocols; General Information; Select Modality; Edit Modality Parameters - Chattanooga Intelect Advanced 2765CS User Manual

OPERATION

CLINICAL RESOURCES LIBRARY CREATING USER PROTOCOLS

General Information

This library is a series of protocols created by the user and stored in the system memory. The following information gives general instructions
as to setting up, saving and accessing User Protocols. Should the Default Protocols be restored, through the User Utilities, all User Protocols will
be permanently removed from the system.
The Therapy System memory will accommodate up to 200 user defined protocols. This is inclusive of all User Protocols, User Sequences and
System Default Protocols. It does not include the Clinical Protocols.

Select Modality

Press the button beside the desired
modality on the Home screen or select
a Clinical Protocol using the Clinical
Resources Library button.
MODALITY BUTTONS
CLINICAL RESOURCES
LIBRARY BUTTON

Edit Modality Parameters

Press the modality Edit button (usually
in the lower right corner of the modality
Treatment Review screen) and edit as
prescribed.
Refer to respective sections of this manual
for Electrotherapy, Quick Link Indications
Ultrasound, and Combination modalities.
For sEMG and sEMG+Stim modalities, refer
to the sEMG and sEMG+Stim Module User
Manual.
78
Intelect® Advanced Therapy System

Select Clinical Resources Library

Press the Clinical Resources Library button
to begin the save process of the new User
Protocol.
EDIT
BUTTON