Electrotherapy Patient Preparation; Electrode Placement - Chattanooga Intelect Advanced 2765CS User Manual

PATIENT PREPARATION

ELECTROTHERAPY PATIENT PREPARATION

Electrode Placement

• Examine the skin for any wounds and clean the skin.
Apply the electrodes to the treatment area.
•
Ensure the electrodes are applied securely to the skin.
•
Ensure good contact between each electrode and the skin.
•
Check the electrode contact regularly during the treatment.
•
Examine the skin again after the treatment.
•
Choose electrodes that fit the anatomy.
•
View the Electrode Placement recommendations in the
•
Treatment Review screen for the particular modality being used
for treatment as a reference point only prior to administering
treatment.
Refer to the respective electrode type instructions on
•
through 38.
Follow electrode manufacturer instructions.
•
• Keep electrodes separated during treatment. Electrodes in contact with
each other could result in improper stimulation or skin burns.
•
Output current density is related to electrode size. Improper
application may result in patient injury. If any question arises as to
the proper electrode size, consult a licensed practitioner prior to
therapy session.
•
Powered muscle stimulators should be used only with the leads
and electrodes recommended for use by the manufacturer.
pages 37
35
Intelect® Advanced Therapy System
WARNING